Anytone AT-D578UV II Plus
Spezifikation
General | ||
Frequency Range | Dual band(US Part90):136-174MHz(V),400-480MHz(U) Europe: 144-146MHz(V),430-440MHz(U) Australia: 144-148MHz(V), 420-450MHz(U) Tri band(US):144-148MHz(V), 222-225MHz, 420-450MHz(U) | |
Channel Capacity | 4000 channels | |
Channel Spacing | 25KHz (Wide Band) ,12.5KHz (Narrow Band) | |
Phase-locked Step | 5KHz, 6.25KHz | |
Operating Voltage | 13.8V DC ±15% | |
Frequency Stability | ±2.5ppm | |
Operating Temperature | -20℃~+60℃ | |
Power Supply Current Requirement (min) | 15 Amps | |
Size | 188x141x40mm (radio only) | |
Weight | 1.04kg (without accessories) | |
Receiving Part | ||
Wide band | Narrow band | |
Sensitivity(12dB SINAD) | ≤0.25μV | ≤0.35μV |
Digital Sensitivity | 0.3uV/-117.4dBm (BER 5%) 0.7uV/-110dBm (BER 1%) | |
Adjacent Channel Selectivity | ≥70dB | ≥60dB |
Spurious Emission | ≤-57dB | ≤-57dB |
Spurious Rejection | ≥70dB | ≥70dB |
Blocking | 84db | |
Hum & Noise | ≥45dB | ≥40dB |
Audio Distortion | ≤5% | |
Audio Power Output | 2W/8Ω | |
Transmitting Part | ||
Wide band | Narrow band | |
Power Output | Turbo | 55W at 144-148MHz 40W at 430-440MHz |
High | UHF/VHF 25W | |
Middle | UHF/VHF 10W 222-225MHz 5W | |
Low | UHF/VHF/225MHz 1W | |
Modulation | ±5.0KHz@25KHz | ±2.5KHz@12.5KHz |
Adjacent Channel Power | ≥70dB | ≥60dB |
Hum & Noise | ≥40dB | ≥36dB |
Spurious Emission | ≤-36dBm | ≤-36dBm |
4FSK Digital Modulation | 12.5KHz（data）7K60FXD 12.5KHz（data+voice）7K60FXE | |
Audio Distortion | ≤5% | |
Error rate | ≤3% | |
Vom Anytone AT-D578UV gibt es mehrere Modelle. Diese können anhand der folgenden Merkmale auseinandergehablten werden:
